Cost-Benefit Analysis - Price Calculator

Component prices are current as of 03/24/2008. For 3-phase only click here. Number of tenants also means number of channels (categories, areas), depending on your context. Usually one circuit is assigned to a channel but they can be combined if same phase. Each phase requires its own channel. Domestic open-wye (120/208) circuits can be treated as 1 phase for percentage billing purposes if both wires can fit through the 1/2" CT opening. Two CT's are needed for dual voltage circuits above 40 amperes. This is slight compromise with the following attributes. With the automatic configuration based on your panel data Standard Schedule or 3-Phase Schedule, the installation will fit like a glove. Example: A typical mid-sized house would call for these four input values:    195     16     1     1         to calculate cost and show a double-digit annual return on investment.                             Example: A 12-slip liveaboard marina might call for these four input values:    870     12     1     1 Example: A 14-unit apt. bldg. might call for these four input values:    1210     14     1     2 Example: A 10-unit Section-8 might call for these four input values:    1455     10     2     2 Annual Return on Investment (ROI) is based on INSTALLED cost and assumes a very conservative (10%) reduction in monthly utility cost. A two-digit ROI with no tax and no risk should not be ignored.

Type in the average monthly utility bill (for R O I) $ Type in the number of tenants or channels # Type in 1 2 or 3 phases per tenant or circuit # Type in 1 or 2 CT's per circuit phase # Estimated installed cost per tenant $       Estimated installed total cost (for R O I) $       Estimated equipment only price* $       R O I based only on a simple 10% usage/waste cutback %       Annual saving from 10% cutback by accountable tenants $       Annual saving from not renting individual utility-owned meters $       Annual saving from demand wholesale rate instead of residential $       Payback time based on ROI should occur in this many months

* With standard CT's.

Review

Includes a fixed charge to cover permanent extended software license, custom configuration, and initial support for each order placed, regardless of size. The total system price is heavily discounted from the raw sum of individual components ordered separately. Also included is an informal commitment to your continued success and enjoyment of this product. Warranty information: 30-day desktop evaluation - full refund minus shipping. Processor/PT - 24 months repair or exchange (our option). A proper installation should last 10 years or more. Standard CT's - unlimited if not corroded by saltwater,etc. Does your apartment complex have eight units or less? Double or triple the functionality of a 16 channel processor by picking up HVAC thermostat closures or electric water heater demands!

mMII 16 channel
Picture of the hardware:		Picture of the software:

Home |  How It Works |  Residential |  Commercial |  Cost/Benefit |  Contact Us |  Tech Info |  Search |  About Us

Copyright © 2004 Ozona Systems All Rights Reserved Worldwide